A Production of floor tiles using buffing dust and sachet water bags

Authors

  • Dahiru Musa Kazaure Department of Environmental Sciences, Faculty of Physical Sciences, Federal University Dutse, Nigeria Author

Keywords:

Production, Floor, Tiles, Buffing Dust, Sachet Water Bags

Abstract

This study focused on the production of floor tiles from recycled pure water sachets and buffing dust as an alternative means of reducing environmental pollution and promoting sustainable waste management. Samples of used pure water sachets and buffing dust were randomly collected from the Federal University Dutse and an abattoir, respectively. The collected materials were processed into three floor tile samples designated A, B, and C and subjected to laboratory tests to evaluate their mechanical and physical properties. Tensile strength and compressive strength were assessed using a Universal Testing Machine. The tensile test was conducted at a crosshead speed of 10.000 mm/min, while the compression test was performed at a crosshead speed of 5.000 mm/min, with a specimen height of 100 mm. Chemical resistance was evaluated using different chemical media, while water absorption was determined by immersing the tile samples in water for 24 hours and recording the change in weight. The quantitative findings showed that Sample A recorded the highest overall performance value of 95%, followed by Sample B at 90% and Sample C at 85%. The difference between Samples A and B was 5 percentage points, while Sample A exceeded Sample C by 10 percentage points. These results indicate that Sample A demonstrated the most favorable overall performance among the three samples based on the reported percentages. The findings suggest that recycled pure water sachets and buffing dust have potential for use in floor tile production. The study recommends further assessment of the tiles' durability, safety, and suitability for practical flooring applications. Encouraging the production of tiles from these waste materials could also create employment opportunities for young people, reduce plastic waste, and contribute to improved environmental sanitation and sustainable waste management.

References

Adebayo, S. O., & Owemah, H. I. (2014). Evaluation of the suitability of LDPE waste as fine aggregate in concrete. 33, 405–425.

Amena, B. T., and Hossain, N. (2024). Influence of physical-mechanical strength and water absorption cxapacity on sawdust- waste paper- recycled plastic hybrid composite for ceiling tile application. Journal of composites sciences, 8(5), 176, https://doi.org/10.3390/jcs8050176.

Borode, J. O. (2010). Introduction to composite materials [Lecture notes]. Department Of Metallurgical and Materials Engineering, Federal University of Technology, Akure, Ondo State, Nigeria.

Callister, D. W. (2007). Materials science and engineering: An introduction (7th ed.) JohnWiley & Sons.

Central Pollution Control Board. (2022). An overview of plastic waste management. Central Pollution Control Board.

Choo, V. K. (1990). Fundamentals of composite materials. Knowen Academic Press.

Davis, M. L., & Cornwell, D. A. (1998). Introduction to environmental engineering (3rd ed.). WCB/McGraw-Hill.

Eze, J. A. (2000). An introduction to rubber technology (Low-price ed.). Macmillan press. London.

Idris, M., Cowie, J. M., & Koenig, J. L. (2011). Introduction to pol processing. Case Waster Reserve University.

Jjyoti, P., & Mishra, S. C. (2012). Processing and properties of natural fiber reinforced Polymer composites. Journal of Materials, Article 297213, 6 pages.

Joseph, K., & Thomas, S. (2012). Effect of fibre on the physical and mechanical properties of fiber-reinforced polyethylene composites. Composites Science and Technology, 53, 99–110.

Kiruthika, A. V. (2024). A review of leaf fiber reinforced polymer composites. Journal of Engineering and Applied Science, 71, Article 24. https://doi.org/10.1186/s44147-024- 00365-2.

Mong, G. R., Tan, H., Sheng, D. D. C. V., Kek, H. Y., Nyakuma, B. B., Woon, K. S., Othman, . M.H.D., Kang,H.S., Goh, P.S., and Wong, K.Y. (2024). A review on plastic waste valorisa tion to advanced material solutions and technologies to curb plastic waste pollution. Journal of cleaner production, 434, Article 140180. https://doi.org/10.1016/j.Jclepro.2023.140180. Micheal, I.O. and Muneer, U., and Friday, A.O. (2012). International journal of innovation Science and Discoveries, (2), 1-3. https://doi.10:5539/jmsriv/n4139.

Nawab, Y., Saouab, A., Imad, A., & Shaker, K. (Eds.). (2023). Natural fibers to composites: Process, properties, structures. Springer. https://doi.org/10.1007/978-3-031- 20597-2.

Ohemeng, E. A., Yalley, P. P.-K., Dadzie, J., & Djokoto, S. D. (2014). Utilization of waste low-density polyethylene in high-strength concrete pavement blocks production. Civil and Environmental Research, 6(5). 200-208.

Obasi, H.C., Iheatura, N.C., Joseph, H.Y., Chike, F.N., Onyegbula, C., Ezeh, V.O, Akanbi, M.N. (2014). Oilpalm press fibre and proxy composite. International journal of Engineering Research, (3), 117-123.

Small man, R., & Bishop, R. (1999). Engineering composite materials. Institute of Materials, Elsevier Science Publishers.

Shifa, S. S., & Zhang, N. (2026). Progress and perspectives on plant-based natural fiber-reinforced polymer composites: Structure–property relationships and emerging design strategies. Journal of Polymer Research, 33, Article 254. https://doi.org/10.1007/s10965-026-04954-y

Singh, S. B., Gopalarathnam, M., Kodur, V. K. R., & Matsagar, V. A. (Eds.). (2023). Fiber reinforced polymeric materials and sustainable structures. Springer. https://doi.org/10.1007/978-981-19-8979-7

Swanson, B.V, Andrew, M., Petrson, N.U., Juliana, H.F., Brown, D.S., and Joseph, N.Y., (2021). Conversion of waste to wealth, Journal of Scientific research vol.4 (6) 299-345.

Temesgen, A. G., Kaufmann, J., & Cebulla, H. (2026). Mechanical performance of natural fiber reinforced polymer composites with critical assessment of recent advances and future perspectives. Discover Materials, 6,

Article https://doi.org/10.1007/s43939-026-00673-9

Vila, N. T., Musialak, A. L., & Ferreira, A. (2020). Use of sugar cane fibers for composites: A short review. In Advances in natural fibre composites: Raw materials, processing and analysis. Springer.

Waste plastic and rubber in concrete and cement mortar: A tertiary literature review. (2023). Sustainability, 15(9), 7232. https://doi.org/10.3390/su15097232.

Wiley, S.N. (2020). Making plastic tiles using waste plastic collected from fertilizer bags, Plastic wires and waste tyre tubes. International journal of Advance Science and Techno logy, 29 (5), 7651-7662.

Downloads

Published

2026-11-16